List Of Components - Probuilder 81534 Manual De Instrucciones

List of components

1. Suction strength regulator
2. Dust extractor hose
3. Speed selector
4. On/off button
5. Telescopic adjustment knob
6. Dust extractor nozzle
7. Carbon brush holder
8. Brush edge
9. Sanding head
10. Suction hose
11. Sandpaper
12. Extra carbon brushes
13. Allen key
14. Screwdriver
2
1 1
9 9
8 8
bl bl
28
7 7 7
About the brush edge
The sanding head (9) has a brush edge (8) all
around. The brush edge ensures that most
of the dust remains inside the sanding head,
so that it is sucked up by the attached dust
extractor. Furthermore, the brush edge is
higher than the sanding pad, so when the
sanding head is placed fl at against a surface,
the sanding pad still rotates freely without
touching the surface until the sanding head
is pressed lightly against the surface. The
sanding pad can therefore easily be held
parallel to the surface, thus avoiding uneven
sanding.
3 3 3
4 4 4
5 5
bm bm bn bo bp bo bp
6 6 6