Tabla de contenido
Publicidad
Configuration
Connect to your LAN via Ethernet or Wi-Fi.
Ethernet
If connected to the LAN via Ethernet, the SolarPoint will attempt
to obtain an IP address automatically from a DHCP server. Use the
Ubiquiti Device Discovery Tool to determine its IP address.
If there is no DHCP server on the LAN, the SolarPoint will fall back
to the following IP address: 192.168.1.20
Wi-Fi
Connect your notebook, tablet, or smartphone to the SolarPoint
SSID named SolarPoint-XYZ, where XYZ represents the last three
characters in the MAC address of the SolarPoint.
Once connected to your wireless network, the SolarPoint will use
the following IP address: 192.168.153.1
User Interface
1. Launch a web browser and enter the IP address of the
SolarPoint. Press Enter (PC) or Return (Mac).
2. Enter ubnt in the Username field.
3. Enter the password in the Password field (the password can be
found on the sticker located under the port cover.)
Publicidad
Tabla de contenido
