Tabla de contenido
Publicidad
Introduction
Thank you for purchasing the Ubiquiti® SolarPoint
Charger. This Quick Start Guide is designed to guide you through
installation and includes the warranty terms.
Package Contents
SolarPoint
Wall Mount Kit
Installation Requirements
• Flathead screwdriver
• 7 mm socket wrench
• Ferrule crimper or pliers
• 18 - 14 AWG wires for battery connection
• 24V or 2x 12V SLA, AGM, or Gel Lead battery
• Solar panel with H4 connectors (10 - 60V open circuit voltage)
• Shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections
• We recommend that you protect your networks from harmful
outdoor environments and destructive ESD events with
industrial-grade, shielded Ethernet cable from Ubiquiti. For
more details, visit: ui.com/toughcable
H4 Connector
Removal Tool
Screw Kit
™
Ferrules
(Qty. 6)
NTC Thermistor
MPPT
Metal Strap
Zip Tie
Publicidad
Tabla de contenido
