Lega Furetto Manual De Instrucciones página 5

When vapour is wet, stop pumping and allow vapour to come out freely, then press and release the button at
longer intervals.
After treatment is completed, take out the yellow container, press the button until the pump is empty then
close the gas nozzle.
IMPORTANT!
At the end of each treatment, clean the serpentine thoroughly to avoid it gets jammed with any
dry product residues.
Take out the liquid tank while Furetto is still on, then keep on pumping as during normal use.
Continue pumping with the device inclined and turned upside down, until no more white smoke
is seen.
2.1 MAINTENANCE
No special maintenance is required. Only, dismount the device and clean the sprayer (3).
Spare parts are supplied by and found at our retailers; each part has its code.
Store the device when it has cooled down, in a ventilated area and away from the reach of children.
2.2 PRODUCTS
The substances that can be sprayed with Furetto, are the same that are generally used for acaricide and
bactericide treatments, complying with the current rules of the country in which they are used.
The company Lega s.r.l. does not accept any responsibility for using substances not authorized by law.
It is recommended to spray only once and prepare the mixture just before using the device.
In case of a minor infestation, one spray will suffice.
It is advisable to avoid making treatments in a nesting period and to treat at a temperature not below 8 °C.
The treatment should be made once a year, in October or November when supers are inserted.
LEGA
srl
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
5 / 17