In Case Of Problems - Modecom MC-S85-400T Manual De Uso

1. unplug the power cord from the AC 230V wall outlet and from the power supply.
2. open your computer following the instructions of the housing.
3. disconnect all the power plugs from the motherboard and other components of a com-
puter: the hard drives, card readers, optical drives, etc.
4. remove the power supply from the computer case following the instructions of the
housing.
5. install new MODECOM power supply in the housing. Connect the cables from the
motherboard and other devices in the reverse order of dismantling the old power supply.
6. ensure that all components are connected properly.
7. close the housing and connect the power cable to the power supply and AC 230V
power outlet.
8. check for proper operation of your entire computer system.

In case of problems:

1. make sure that all the computer's components are in working order and not damaged
before replacing the power supply.
2. make sure that the power supply is correctly matched to the current configuration of the
computer and is fully compatible with it.
3. make sure the power cord is connected properly to both the power supply and the AC
230V power outlet.
4. verify that the "I/O" power switch is set to "I" position.
5. check that all components of computer are properly connected, the connectors proper-
ly adhere to each other, whether there is not a short circuit or other abnormalities in assembly.
6. check the connection of all components of a computer to each other and to the power
supply.
Choosing the right power supply model:
Due to the large diversity of computer sets and a large number of power supply models
with different technical specifications, the manufacturer does not affect the user's choice
of the model and specification of the power supply he will use and of configuration of the
computer on which it is mounted. The issue of choosing an adequate power supply, which
will ensure long and trouble-free operation, the user should consult with the dealer of power
supply unit or a dealer of entire computer set. Any complaints referring to malfunction of the
power supply due to improper selection of its parameters to your computer configuration can-
not be considered by the manufacturer.
PC power supply construction include electrolytic capacitors, which dry up during long-
term operation under high load. Therefore, it is recommended to select the output power
efficiency of the power supply according to the needs of your computer system so that the
power supply continuously have big spare power level. Continuous operation at maximum
parameters can result in significant shortening of the life of the power supply, unstable volt-
19