Manitou R7 PRO Manual De Instrucciones página 9

MAINTENANCE
Your fork requires periodic maintenance, cleaning, and inspection. Torque values
of bolts and fasteners must be checked periodically, more often if riding in extreme
conditions. To maintain top performance, it is recommended that the fork be periodically
disassembled, cleaned, dried and re-lubricated. After every ride wipe down the inner
legs and the seal area to extend the life of the seal. We highly recommend that
service to your fork be completed by a qualified bicycle mechanic. You can
download service and tuning instructions on the web at www.manitoumtb.com
Recommended Minimum Fork Maintenance
Every 200 hrs/Yearly,
whichever comes first
TABLE 2- RECOMMENDED TORQUE SPECIFICATIONS
AXLE PINCH BOLTS
REMOTE HANDLEBAR CLAMP
REMOTE LEVER CABLE CLAMP
SCREW
MARKHOR 15MM THREADED AXLE
HEXLOCK SL AXLE
Every ride
Every 50 hrs
ITEM
Clean dirt from wipers, wipe legs
Inspect for scratches on legs
Check air pressure and sag
Check axle torque
Replace casting splash bath
Lubricate leg seals
Clean and inspect bushings
Check fastener torques
Replace splash bath
Replace leg seals & foam ring
Replace damper oil
Replace air spring seals and re-lubricate
TORQUE SPECIFICATIONS - N m (in lb)
3,4 - 4,5 N m (30 - 40 in lb)
0,45 - 0,68 N m (4 - 6 in b)
0,34 - 0,56 N m (3 - 5 in lb)
14 N m (124 in lb)
9 N m / 80 in lb
9