GETTING STARTED
Accu-Brew Mode
WARNING
If a filter basket overflow occurs, unplug the coffee system and
allow the coffee in the filter basket to cool before removing the
filter basket. When using decaffeinated coffee, do not exceed the
coffee manufacturer's recommended serving amount.
Turn the Mode Selector to Accu-Brew.
1.
Lift the water reservoir upwards to remove it from the coffee
2.
system.
Remove reservoir lid. Fill the reservoir with enough water
3.
for the number of cups that you want to brew. The unit will
brew all of the water that you put in the tank.
Replace the water reservoir lid on the water reservoir.
4.
Re-install the water reservoir on the coffee system.
The default setting for Accu-Brew is 6 cups and a medium
5.
brew strength. If the default settings are changed, the coffee
system will remember your last setting, even if the power is
disconnected.
Set the number of cups to brew. This should match the
6.
volume of water added in step 3. Turn the Time/Cups knob
clockwise to increase the number of cups. Turn it anti-
clockwise to decrease the number of cups.
Set the desired strength. Turn the Brew Strength knob
7.
clockwise to increase the coffee strength. Turn anti-
clockwise to decrease the coffee strength.
Fully open coffee drawer and insert a no. 4 filter paper cone
8.
into the filter basket.
Burn Hazard.
13