Culligan ClearLink Pro Instrucciones De Instalación Y Operación página 6

RO AIR GAP INSTALLATION
NOTE: These steps are only for RO installations using an air gap.
NOTE: If your filtration system is not an RO, skip to System Startup on Page
NOTE: Install the drain connection to the drain plumbing according to the manual
provided with your RO system.
Mount the air gap device as near to counter
top as possible and in a vertical orientation.
NOTE: Failure to mount the air gap device
vertically will cause it to leak water.
Connect the large fitting of the air gap device to
the connection on the drain plumbing.
AIR GAP
Connect the drain line coming from the RO
system to the small connection of the air
gap device.
6
7.