Mounting The Water Tank On The Robot Vacuum Cleaner - Medion MD 19601 Manual De Instrucciones

8.2. Mounting the water tank on the robot vacuum
cleaner
NOTICE!
Risk of damage to property!
Moisture from the mop attachment and residual wa-
ter in the water tank may damage the appliance or the
charging station.
 Remove the water tank immediately before return-
ing the wiper robot to the charging station.
 Hook one of the water tank locking tabs into the
intended locking slot.
 Then, carefully press the water tank downwards
until the second locking tab audibly clicks into the
locking slot.
 To release the water tank, lift the water tank by the
front and pull the water tank out of the robot vac-
uum cleaner, being careful not to apply too much
force.
214