physa HFI-10 Manual De Instrucciones página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
USER MANUAL
PRODUCT NAME:
HIGH FREQUENCY ELECTROSTIMULATION DEVICE
MODEL:
HFI-10
MANUFACTURER NAME:
EMAKS SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ SP.K.
MANUFACTURER ADDRESS:
UL. DEKORACYJNA 3, 65-155 ZIELONA GÓRA
CAUTIONS
Please read this user manual carefully.
GENERAL SAFETY INFORMATION FOR THE USE OF ELECTRICAL DEVICES
To avoid injury from fire or electric shock, please make sure to follow these safety instructions when using the device. Please
read the instructions carefully and make sure that you have understood them well. Keep the manual at hand to be able to
read it again at any time. Always use grounded power outlets providing an adequate voltage (as indicated on the device). If
you have any doubt, let an electrician check that your outlet is properly grounded. Never use a damaged power cable. Do not
use the device in damp or wet environment, or if your hands or body are damp or wet. Protect the device from sunlight. Use
the device in a protected environment to avoid damaging the equipment or endangering others. Make sure the device can
cool down properly and avoid placing it too close to other heat-producing devices. Before cleaning, always unplug the device.
Use a soft damp cloth for cleaning. Avoid using detergents and make sure that no liquid enters the device. The inner elements
of this device don't require any maintenance from the user. An unauthorized opening of the device may void the guarantee.
SAFETY GUIDELINES
1.
Please read and understand these instructions carefully before operating the device! Please observe the safety
guidelines carefully in order to prevent any damage due to improper use!
2.
Please keep this manual at hand for future reference. If the device is handed over to third parties, this manual must
be handed over too.
3.
Only use this device indoors and for its intended use.
4.
The guarantee does not cover damages resulting from improper use or operation.
5.
Before first use, ensure that the voltage and current requirements of the device match the available power supply.
6.
This device should not be used by persons (including children) with limited physical, sensory or mental aptitude,
or lacking the necessary experience and/or knowledge – unless they are supervised by a qualified person or have
received safety instructions from this person.
7.
ELECTRICAL SHOCK HAZARD! Do not attempt to repair the device yourself. In case of device failure, repair must
be done by a qualified professional.
8.
Please check the main plug and power cable regularly. If the power cable is damaged, it has to be replaced by the
manufacturer or its customer service or another qualified person, in order to prevent hazards.
9.
Prevent damages to the power cable by avoiding squeezing, bending or rubbing on sharp edges and keep it away from
hot surfaces and open flames.
10.
CAUTION DANGER TO LIFE! During cleaning, never immerse the device in water or other liquids. Never put the
device under running water or pour other liquids on it. Never pour / dispense liquids over the lamp. If any liquid
should get inside the device, immediately unplug it and contact the service team.
11.
Don't open the device under any circumstances.
12.
WARNING!
USING THIS ELECTROSTIMULATION DEVICE HFI-10 IS NOT RECOMMENDED WITH THE
FOLLOWING CONDITIONS: rosacea, telangiectasia, allergic conditions of the skin, pregnancy (any surgery and
treatment), hypertension, swellings, anxiety, heart problems, skin wounds, fever, asthma, nervous disorders, epilepsy,
metal implants.
13.
WARNING! Always use the device on dry skin and hair! The glass electrodes on the device must also be kept dry
during use!
14.
Never use the device with a damaged glass electrode.
15.
Never leave the device and its packaging unattended.
TECHNICAL DATA
Product name
Model
Art. No
Rated voltage [V] / Frequency [Hz]
Power [W]
High frequency electrostimulation device
HFI-10
4103
230 V / 50 Hz
10
Rev. IV 2016
7

Publicidad

Tabla de contenido
loading

Tabla de contenido