BP-GIKLED08
5. Operation
5.1. Introduction
This insect killer uses an LED to attract flying insects. The fan will suck these insects
into the container and dry them. This insect killer does not produce any noisy
electric shocks nor does it emit any toxins, smoke, scent or radiation.
This insect killer is designed to be used indoors (bedroom, living room).
Keep the insect killer working for more than 12 hours at first use. Do not open the
container during use. Make sure the insects are dried to death to prevent them from
escaping.
Keep the insect killer working for 3 hours before going to sleep. Make sure to keep
windows and doors closed.
5.2. How to Use
1. Connect the insect killer to a 5 V power supply. Install the insect killer in a dry
location on a stable and non-slippery surface.
2. Slightly press the on-off button to start the insect killer.
3. Press the same button to stop the insect killer. Disconnect from the power sup-
ply after use.
For best results, turn off other light sources and prevent from installing the appli-
ance in the draught.
6. Troubleshooting
Appliance does not start
Problem
Power supply not con-
On-off button not pressed
Reason
nected well
6
Possible solution
Reconnect the power
supply
Press the on-off button