ΟΔΗΓΙΕΣ ΑΣΦΑΛΕΙΑΣ / INSTRUCTION DE SÉCURITÉ / SAFETY INSTRUCTIONS / INSTRUÇÕES DE SEGURANÇA
SICHERHEITSHINWEISE / VEILIGHEIDSINSTURCTIES INSTRUZIONI DI SICUREZZA
YOKE & DOWNROD ASSEMBLY
1-
Feed motor lead wires through downrod assembly & canopy. Insert down rod into yoke. Make sure the gasket on
top of downrod assembly is properly inserted for effective water proofing.
2-
Insert the cross pin throught yoke & down rod, then secure with cotter pin.
3-
Thighten both jam screwa to further secure downrod.
4-
Pull down yoke cover in proper position.
5-
Lift fan assembly onto mounting bracket.
6-
Carefully lift the fan assembly onto mounting bracket. Rotate fan so that the notch on the ball engages the ridge in
the mounting bracket.
ELECTRICAL CONNECTIONS
33019- Lombok
Faro
16