Nevir NVR-133UC Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. In RADIO, CONDENSER MICROPHONE, Mode, press and hold the
ENCODE button till the USB SD INDICATOR flashing.
2. In case the STOP button is pressed during the Encode (Record)
process, the sound being Encoded (Recorded) to the Storage Media will
also stop at the same time.
3. To delete sound track, press USB SD Delete Button during the sound
track is playback.
SPECIFICATIONS
Speaker:
Power Output:
Battery Operate:
AC Operate:
PRECAUTIONS:
1. For AC operation, make sure the voltage is compatible. Always use
the provided AC power cord; never use other AC power cord.
For DC operation, simply insert three "UM-1 / D" batteries for unit
operation.
2.Always disconnect the AC power cord from the AC power source when
it is not in use or when DC power is operating.
3. Do not leave the batteries in the compartment for a long time.
Remove the batteries to avoid leakage and damage.
4. Do not expose the unit to extreme temperature nor high humidity to
ensure normal functioning for a long lifetime.
For instances, never place the unit in bathing areas nor around stoves
and radiators.
5. If you find the unit is not working properly, please take it to your
nearest services centre. Do not attempt to repair by yourself.
WARNING :
To prevent fire or shock hazard, do not expose the unit to rain or
moisture.
To avoid electrical shock, do not open the cabinet, refer to service agent
or qualified engineer only.
3.5 inches, 8 ohm dynamic speaker
0.5W
DC 4.5V (3 x "UM-1 / D")
127V/220V ~ 50Hz/60Hz
-Page 3

Publicidad

Tabla de contenido
loading

Tabla de contenido