Method Of Dismounting And Installation; Placement Sites Of Air Purifier - HTW SPACE HTWPUR24SPA Manual De Usuario

Before use
Method of dismounting and
installing the air inlet panel
1 Method of removing the air inlet Panel.
Hold on to the groove at both sides of the air
inlet panel, then gently pull it up.
2 Method of installing the air inlet panel.
Reinstall the air inlet panel, alignment and
insert it into the fixed groove, and then gently
push it up.

Placement sites of air purifier

In order to make your room air to achieve good
effect on both sides of the cycle, make sure the
gap between the air inlet and the wall at least
50 cm, the air outlet at least 10 cm.
Please keep 1 meter away from television,
radio, etc.
Please do not put the power plug together with
the television, radio and other electrical power
plug inserted into the same socket, (otherwise it
may cause screen jitter and noise generated.)
The long-term placement in the same sites
may dirty the host walls.
To ensure the machines have adequate
ventilation and maximum efficiency, don't
interfere with the air outlet and air inlet.
34