Cleaning and maintenance
Be sure to pull out plug before cleaning.
Do not put the product into water or any other
liquid. Do not use corrosive or flammable gas
(e.g. bleach or alcohol) to clean any part of the
product.
Only pre- filter can be cleaned with water,
other filters can't.
Clean air purifier
Clean the medial and lateral regularly to
prevent dust accumulation.
1.use soft dry cloth to wipe the dust.
2.use soft dry cloth to clean inlet and outlet.
Clean air quality sensor
Clean the air quality sensor every two months to
make sure purifier run at the best performance.
If the purifier used in dusty environment, please
clean it more often.
Attention
When the indoor humidity is very high, the air
quality indicator may be forming condensate. So
even if the air quality is good, air quality indicator
may also indicate poor air quality, in this case,
you have to clean the air quality indicator or use
any manual speed setting.
1 .Use a soft brush to clean the inlet/outlet
of air quality sensor.
2.Remove the protective cover of air quality
sensor.
3.Clean the air quality sensor, inlet and outlet
with wet cotton swabs slightly.
4.Dry it with dry cotton swabs.
5.Remount the protective cover of air
quality sensor.
42