GB JL-944
TRAY/TABLE
10 - Pull the regulation handles, located on the side,
to the outermost position and place the table.
The table has 3 position. (Fig.7)
11 - You can use the high chair with or without the table (Fig.8) In this case, it can be stored using the
guides found in the rear part of the highchair (Fig. 8a).
8a
BACKREST
12 - Pull the lever (located on the back)
upwards, to adjust the angle. There are three positions.
Place the lever in the desired position
until hearing a locking sound "clack". (Fig 9)
10