Cleaning And Maintenance; Troubleshooting; Disposal At The End Of Life - Imetec N6702 Instrucciones De Uso

Parrilla de contacto
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
• When cooked, open the cover and remove the food using tongs, taking care not to scratch
the plates.
• Place the switch in the OFF position.
WARNING! Always disconnect the appliance from the
socket before cleaning or performing maintenance.
WARNING! Risk of fire. Wait for the appliance to cool
completely before storing it.
• Wash the bottom and top plates with a damp and well-wrung sponge.
• Wipe the exterior of the toaster/grill with a damp but thoroughly squeezed sponge.
• Dry with a dry cloth.
DO NOT use abrasive sponges or sharp tools to avoid damaging the non-stick coating.
If one of the following problems occurs, adopt the solution indicated:
PROBLEM
The appliance will not switch on.
The appliance packaging is made of recyclable materials. Dispose of the packaging in
accordance with the environmental protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), the crossed bin symbol on the appliance or its packaging indicates that the
appliance must be disposed of separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for
electrical and electronic equipment. Alternatively, instead of handling the disposal,
the user can hand over the appliance to the retailer when a new, equivalent one is
purchased. The user can hand over electronic products measuring less than 25 cm to
retailers of electronic products having a sales area of at least 400 m
no obligation to buy. Appropriate separate collection for the subsequent procedure for the
decommissioned appliance for recycling, which includes treatment and environmentally
friendly disposal helps prevent adverse effects on the environment and health and promotes
reusing and/or recycling materials that the appliance consists of.

CLEANING AND MAINTENANCE

TROUBLESHOOTING

Check that the plug is connected to the mains supply.
Check that the O/I switch is in the ON position.

DISPOSAL AT THE END OF LIFE

SOLUTION
free of charge and with
2
EN
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

N6701

Tabla de contenido