LEARNING ABOUT YOUR
CUPCAkE MAkER
Warm up / Bake Ready Indicators
Indicates that the cupcake maker is
on and heating.
Easy-lift handle
Designed for easy
and safe use.
Non-stick coating
Non-stick plates for easy
cleaning.
Cupcake holes
Create 6 delicious
cupcakes in 10 minutes.
-4-
HOW TO USE
For cupcake batter you can use:
1. Store bought cake batter.
2. Use the cupcake recipes beginning on page 7.
To use Cupcake Maker follow these guidelines:
1. Insert the plug into a 120 volt power outlet.
2. Allow your cupcake maker to pre-heat until the 'WARM UP' light goes
out and the 'BAKe ReAdY' light comes on. This indicates that the
cooking plates have reached the correct temperature for cooking.
3. We recommend using fluted cupcake papercups for best results. Insert
paper cupcake cups into cupcake maker.
4. Fill cupcake cups with batter using a spoon 3/4 up to the top of the paper
cup.
Tip: If placing mixture directly into the cupcake maker, it is advised to lightly
spray the cooking plates with a cooking oil spray before use.
5. Gently close the lid.
6. Allow to cook for approximately 10 minutes or until a tooth pick inserted
into the cupcakes comes out clean.
Tip: do not lift the lid before the recommended cooking time as this will affect
the result.
1. To remove cupcakes, always use a plastic or wooden spatula. Never use
a sharp object or metal, as this will damage the non-stick surface of the
cooking plates.
NOTE: Surfaces are hoT.
-5-