Technical Specifications - hi-Fun hi-Call Manual Del Usuario

All the previous functions are available if supported by the paired
device.
Charge hi-Call Leather
If supported by paired devices, the charge status of hi-Call battery
is displayed on the screen of the connected device.
When the hi-Call Leather battery is discharged, the multifunction
LED (2) starts flashing red. It indicates that in a few minutes hi-Call
will be turned off in order to protect the battery.
To charge the battery connect the hi-Call Leatherʼs MicroUSB plug
to a power source such as an USB port of your computer, a car
charger or a wall charger compatible with standard USB.
It is possible to charge hi-Call Leather while in use. When operating
hi-Call Leather is connected to the power supply, it switches off in
order to protect the battery. You can now switch it on again. In this
case the indication LED (2) flashes red until the battery is fully
charged. If you disconnect the power source while hi-Call Leather is
charging, it remains operating.
If hi-Call Leather is not operating, as soon as it is connected to a
power source, the multifunction LED (2) lights on in red and it turns
off once the battery is fully charged. It is possible now to disconnect
hi-Call Leather from the power source.

Technical specifications:

Battery life: until 12 hours
Battery duration on standby: until 10 days
Charge time: about 30 minutes
Operating range: >10 metres (>30 metres outdoor)
Warnings:
-Never immerse hi-Call Leather in water and do not wash it in a
washing machine. hi-Call Leather is not waterproof.
- Follow the local rules about mobile phones usage and their
accessories while driving.
- Keep hi-Call Leather out of the reach of small children to avoid
chocking hazard.