Declaration Of Conformity; Symbols Used; Limitation Of Liability - Beem DYNAMIC i-POWER Manual De Instrucciones

DYNAMIC i-POWER

Declaration of Conformity

BEEM hereby declares that this appliance
complies with the fundamental require-
ments and other relevant provisions of
2006/95/EC and 2004/108/EC directives.
The full declaration of conformity can be
found under www.beem.de.

Symbols used

DANGER
This indicates an imminent hazardous
situation, which could lead to severe
physical injury or death.
► Follow these instructions to avoid
danger.
WARNING
This indicates a possible hazardous
situation, which could lead to severe
physical injury or death.
► Follow these instructions to avoid
danger.
CAUTION
This indicates a potentially hazardous
situation, which could lead to minor
injuries or material damage.
► Follow these instructions to avoid
danger.
NOTE
► A note contains additional informa-
tion to simplify the use of the appli-
ance.
16
Intended use
This appliance is intended primarily for
non-commercial use in closed rooms for
ironing and steam ironing of textiles. Any
use other than previously stated is consid-
ered as improper use.
WARNING
If not used for its intended purpose and/
or used in any other way, the appliance
may be or become a source of danger.
► Use the appliance only for its in-
tended purpose.
► Observe the procedures described in
this user manual.
No claims of any kind will be accepted for
damage resulting from use of the appli-
ance for other than its intended purpose.
The risk has to be borne solely by the
user.

Limitation of liability

We assume no reliability for damage or
follow-up damage in the case of:
■ failure to observe the instructions in
the user manual,
■ use for other than the intended pur-
pose,
■ improper or unsuitable handling,
■ incorrectly performed repairs,
■ unauthorised modifications,
■ use of non-approved parts or spare
parts,
■ use of unsuitable supplementary or ac-
cessory parts.
BEEM - Elements of Lifestyle
EN