Hamilton Beach 8251 Manual De Uso página 9

Operation Instructions
TESTING THE ALCI PROTECTION DEVICE
This appliance is equipped with a polarized Appliance Leakage
Circuit Interrupter plug (ALCI). This device will automatically shut
off the hair dryer under certain abnormal operating conditions,
such as submersion of the dryer in water.
The ALCI must be tested before each use of the hair dryer.
To test this protective device:
Make sure the ALCI is plugged in; then press the "Reset"
1.
button.
Press the "Test" button. The "Reset" button should pop out,
2.
which indicates the ALCI is working properly.
NOTE: If the "Reset" button does not pop out during the test,
or pops out before or during operation, or if the hair dryer fails
to function properly, do not operate the hair dryer. Refer to the
warranty.
Press the "Reset" button again to reactivate the ALCI. You are
3.
now ready to operate the hair dryer.
9