Remote Control; Backup Batteries - Brandt BDS-795L Manual De Instrucciones

Remote Control

1
2
3
4
5
6
7
8
9
10
11
12
13
Remote control range
• Point the remote control at the remote sensor at the front of the unit. The remote control
works within a distance of about 6 metres from the sensor and within an angle of about
30 degrees from the left and right sides.
• To avoid interference, do not put any objects in front of remote sensor.

BACKUP BATTERIES

• You can only use AC power as power supply.
Batteries (not supplied) are for backup purpose.
• If the system is unplugged or if a power failure occurs,
all settings of the unit will be erased unless there are
batteries in the unit.
1. Remove the battery cover.
2. Insert batteries into the battery compartment.
• Make sure all batteries are inserted with the correct
polarity as shown on the inside of the battery
compartment.
3. Replace the battery cover.
• If the unit is not to be used for a prolonged period of time, remove the batteries to avoid damage
by battery leakage.
DS406_Kesa_BDS-795L_IFU(EN-FR-NL-ES-CZ-SK).indd 7
Buttons:
1. DIMMER
2. ON/OFF
14
3. DOCK
4. FM
15
5. MENU
6.

16
7.
H
8.
BF
9. REPEAT
17
10.

11. ALARM 1
18
12. SLEEP
13. EQ
19
14. MUTE
15. LINE IN
16. CLOCK
20
17.
G
18. PROG
19. ALARM 2
20. VOL+ /VOL-
EN
7
2014-2-17 15:40:21