Connecting Power; General Operation; Standby/On/Off; Selecting Modes - Brandt BDS-795L Manual De Instrucciones

CONNECTING POWER

1. Place the unit on a flat stable surface.
2. Connect the AC power cord to the mains socket.
• The mains socket used for the unit must remain accessible during normal use. In order to disconnect
the unit from the mains, the mains plug should be removed from the mains power socket.
EN

GENERAL OPERATION

STANDBY/ON/OFF

• When the unit is connected to the mains socket, the unit will be in standby state.
• Press ON/OFF/SOURCE on the unit or ON/OFF on the remote control to switch the unit
on.
• Press and hold ON/OFF/SOURCE on the unit or press ON/OFF on the remote control to
switch the unit back to standby state.
• Disconnect the mains plug from the mains socket if you want to switch the unit off
completely.

SELECTING MODES

Repeatedly press ON/OFF/SOURCE on the unit to switch between DOCK, LINE IN and FM
mode. You can also press DOCK, FM or LINE IN on the remote control to select the desired
mode.
NOTE: If there is no signal under the DOCK and LINE IN mode, the unit will automatically
enter the standby state within 15 minutes.

SETTING THE TIME AND CALENDER

The built-in clock shows the correct time on the display.
1. Press and hold CLOCK on the remote control or SNOOZE/DIMMER on the unit until the
hour digits flash on the display.
2. While the hour digits are flashing, press & hold or repeatedly press
control or
H
3. Press CLOCK on the remote control or SNOOZE/DIMMER on the unit to confirm.
• The minute digits will flash on the display.
4. Repeat steps 2 to 3 to set the minutes, year, month and date.
CLOCK SYNCHRONIZATION (REMOTE CONTROL ONLY)
1. In the standby state, press and hold MENU for a few seconds, the the unit will enter the
CLOCK SYNC mode.
2. There are three clock synchronization modes available for choice:
• iPod Only synchronize the time with the iPod/iPhone/iPad, and sync per 1minute.
• RDS Only synchronize with the RDS radio station.
• OFF Turn off the clock synchronization function, only adjust the clock manually.
3. Press to
BF
8
DS406_Kesa_BDS-795L_IFU(EN-FR-NL-ES-CZ-SK).indd 8
/ on the unit to set the hour.
G
confirm.
/ on the remote
 
2014-2-17 15:40:21