Air Cooling; 'Sleep' Setting - ZIBRO CLIMA P7000 Instrucciones De Uso

1 .

AIR COOLING

1 Attach the connector to the hose.
B B
2 Connect the hose to the machine and check that it is firmly attached (fig. B).
Press the 'MODE' button ¹ to select the cooling function.
3
the display.
4 Use the 'TEMP SET' buttons
minimum of 15°C and a maximum of 30°C.
Select the desired ventilator speed with the 'FAN SPEED' button ¸:
5
High, medium or low
ATTENTION
Do not use heat sources in a room where the air conditioner is in operation. The
air conditioner must be used when the ambient room temperature is between
15°C and 35°C. Ice may form if the ambient room temperature is below 15°C.
The machine will switch itself off automatically if the ambient room
temperature rises above 35°C.

'SLEEP' SETTING

This setting can only be used when the cooling function is activated. Press the
'SLEEP' button
rise 1 °C. After 6 hours the airconditioner will automatically turn off. Pressing the
'SLEEP' button again de-activates this function.
2 .
AIR DEHUMIDIFICATION
Press the 'MODE' button ¹ to select the de-humidification function.
1
appear on the display.
ATTENTION
An air exhaust hose is not required for this function. We recommend that you
close all windows and doors for optimum results. The operational range of the
de-humidifier is between 12°C and 30°C.
to select the desired temperature between a
.
. will appear on the display. Every hour the temperature will
will appear on
will
4
29
P7000 / P9000 2001