Technical Data; Extension Cord - Surtek IC61000 Manual De Usuario

6. LCD screen.
7. DC output (direct current), terminal "+" (red).
8. DC output (direct current), terminal "-" (black).
9. Removable lighting switch.
10. Fan.
11. Battery cable.

TECHNICAL DATA

IC61000
POWER
INPUT POWER
OUTPUT POWER
OUTPUT FREQUENCY
MAX. INPUT POWER
USB OUTPUT
OPERATION TEMPERATURE
SHUTDOWN DUE TO OVER
LOAD
WEIGHT
OPERATION INSTRUCTIONS
IMPORTANT: Connecting In a wrong way
will destroy the power inverter as well as the
electrical equipment, please follow the follow-
ing steps and sequence and make sure use the
products in a right way.
When use in the car, please connect the inverter
with the DC cigar lighter port.
1. There is a red and a black cable for the bat-
tery, screw the red wire with the "+" of the in-
verter and the "+" terminal of the battery; then
screw the black wire with the "-" of the inverter
and the "-" terminal of the battery; please, do
not reverse the polarity, or it will damage the
inverter and the battery.
2. Turn on the inverter switch, the green light
should turn on; then insert the plug of the elec-
tric appliance into the AC output socket of the
inverter.
3. For better performance, we recommend that
the consumer use it with a battery that exceeds
100 Ah.
OPERATING RECOMMENDATIONS
a) Only use class II items on your device.
b) Scope of the electrical appliance and appli-
ances that have inapplicability;
1. All electric appliances that exceed the rated
power of the inverter:
2. Generally capacitive load and perceptual load
appliances are not inapplicability:
Air condition, high power electric drill, fridge,
microwave oven, blender;
1 000 W
12 V
3 x 110 V~
60 Hz
94 A
2 x 2,1 A
5 ºC - 35 ºC
(1100-1350) W
2,3 kg (5 lb)
E N G L I S H •
3. We do not recommend using this inverter
with appliances which have strict requirement
on power supper, such as precise equipment, if
use ordinary power inverters with this kind of
equipment will affect the measuring data.
c) Scope of electric appliance that inapplicability
with the USB (Only for inverters with USB port).
1. USB is only for charging , do not have date
exchange function;
2. Before charging please check carefully if the
charging current of the appliance is under the
inverters current, if it is exceed the charging cur-
rent of the inverter please do not use, or it may
destroy the USB port.
3. Some appliance must charging use certain
charger, please don't charge with USB port.
IMPORTANT: Check the voltage before using
the inverter. The input voltage of the inverter
must be the same as the battery voltage; the
working voltage of the device must be the same
as the inverter output voltage; Once all are
equal, connect them correctly according to the
"connection explanation" that is in this manual.
USE the inverter in ventilated areas and make
sure that the fan is not blocked; do not place
the inverter in the rain or in a humid place, keep
it dry. To ensure a long lifetime of the inverter,
keep it running with less than 85% of the rated
power.
The inverter have input under voltage protect
function, input over voltage protect function,
over load protection function, over temperature
protect function and short circuit protect func-
tion. If these happened, the inverter will stop
work and after the breakdown, the inverter will
restart work automatically.
To save energy, the fan does not work unless
the following situation occurs: when the inter-
nal temperature of the inverter exceeds 50-65
degrees.

EXTENSION CORD

1. We do not recommend the use of a cable ex-
tension between the inverter and the battery,
since the DC power will be lost and will affect
the effect on the inverter.
2. If you really need to use an extension cord we
suggest you use a high quality cable to reduce
the loss of electricity.
ADDITIONAL SECURITY INSTRUCTIONS
1. This is a modified sine wave inverter; When
measuring the voltage, use precise equipment
(RMS).
2. When the power is connected to an audio,
radio or TV system, the device may have inter-
ference and this is a normal phenomenon;
Us er 's M an u a l
9