In Case Of Difficulty - Clarion DVH943 Manual De Instrucciones

9. IN CASE OF DIFFICULTY

Problem Cause
Nothing happens when The microprocessor has
buttons are pressed. malfunctioned due to noise,
etc.
No sound produced The source being played is
from centre speaker a 2-ch source lacking a
centre channel (music CD,
linear PCM stereo, etc.).
Dolby Pro Logic II or DSF
is set to OFF.
The centre speaker setting
is OFF (default setting is
ON).
16
DVH943
Measure
Use a narrow stick to press the [RESET] switch on
the side of the 5.1ch surround decoder. Note that
when the [RESET] switch is pressed, all titles and
other data placed in memory will be erased.
[RESET] switch
5.1ch surround
decoder
Either choose one of the Dolby Pro Logic II modes,
or set DSF effect to ON (see P. 7).
Set centre speaker (SP-SEL) to ON (see P. 8)