Power Level Selection; Time-Delayed Switch-Off; Switch Oscillation On / Off; Overheat Protection - Profi Care PC-HL 3086 Manual De Instrucciones

CAUTION:
When not using the appliance, disconnect the mains
plug.

Power Level Selection

Press the MODE button repeatedly to choose between
the available power levels. The indicator lamps for Fan,
Low and High indicate the selected power setting.
Fan operation - Setting 1 (without heating)
Fan
The display shows
Fan operation - Setting 2 (without heating)
Fan
The display shows
Low Power level / Heating level 1 (1000 Watt)
High Power level / Heating level 2 (1500 Watt)
• Use the UP and DOWN buttons to select a tem-
perature between and
• The selected temperature flashes briefly on the display.
Afterwards, the current room temperature is shown on
the display again.
• The appliance will automatically switch to the respective
power setting if the selected temperature falls into a
higher or lower power setting.
NOTE:
• Once the current ambient temperature has been
reached, the appliance switches off and automatically
maintains the set temperature level.
• There may be a slight difference between the displayed
and the actual room temperature. This is due to the de-
sign and does not mean that the appliance is defective.

Time-delayed Switch-off

You can set a time-controlled switch-off for the appliance.
• Use the TIMER button to select a time setting
between and hours. The indicator lamp above the
TIMER button lights up.
• Upon expiry of the timer, the appliance will switch off
automatically.

Switch Oscillation On / Off

SWING button to switch on oscillation.
Press the
The appliance automatically rotates in the range of about
45 degrees. The indicator lamp above the SWING button
lights up.

Overheat Protection

The appliance features an overheat protection mechanism
causing the appliance to switch off automatically in case of
overheating.
ON / OFF button to switch the appliance off.
1. Use the
2. Set the on / off switch, located at the back of the appli-
ance, to the O position.
44
PC-HL3086_IM
°C.
3. Disconnect the mains plug from the socket.
4. Let the appliance cool down for approx. 10 minutes
before using it again.
NOTE:
If the overheat protection mechanism causes the appli-
ance to switch off again after a short period, this might
indicate a defect.
1. Switch off the appliance and disconnect it from the
mains.
2. Have the appliance checked by your dealer or our
customer service.

Cleaning

WARNING:
• Always disconnect from the mains before cleaning and
wait until the appliance has cooled down.
• Never immerse the appliance in water to clean it. This
may lead to electrical shock or fire.
CAUTION:
• Do not use wire brushes or other abrasive materials.
• Do not use caustic or scouring agents.
• Wipe away dust with a dry cloth.
• Flecks can be removed with a suitably damp cloth.

Dust on the air outlet openings

Dust accumulating on the air outlet openings may lead to
overheating.
• Remove the dust by careful brushing.
or
• Use the upholstery nozzle of your vacuum cleaner to
remove the dust.

Filter

1. Open the ventilation grille and remove it.
2. Remove and clean the filter. You may use a brush to
clean the filter.
3. Reinsert the filter.
4. Reattach the ventilation grille to the appliance. Observe
the guide lugs. The ventilation grille must audibly
engage.

Technical Data

Model:..................................................................PC-HL 3086
Power supply:.....................................220 - 240 V~, 50 - 60 Hz
Power consumption: ...................................................1500 W
Protection class: ...................................................................
Net weight: ....................................................... approx. 2.2 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
18.06.20