Specifications - Archos Manual De Usuario

Error
massage
Error
massage

SPECIFICATIONS

Power supply
Display mode
Manuel_BPM_book.indd 21
Error 5 or Error 6 shows
Error 10 or Error 11
shows
Error 20 shows
Error 21shows on the
display.
System error
occurred.
The monitor detected
motion, talking or
the pulse is too poor
while measuring.
The measurement
process does not
detect the pulse
signal.
The treatment of the
measurement failed.
2*AAA batteries
Digital LCD V.A.36x41mm
Retake the measurement.
If the problem persists,
contact the retailer or our
customer service department
for further assistance. Refer
to the warranty for contact
information and return
instructions.
Relax for a moment and then
measure again.
Loosen the clothing on the
wrist and then measure again.
Relax for a moment and then
measure again.
06/06/2014 10:21:22
EN
21