Cleaning and care
• Warning! Unplug the product and let it cool
down completely before cleaning. Never
immerse electrical parts of the product in
water during cleaning or operation. Never
hold the product under running water.
• Warning! When cleaning, never use
solvents or abrasive materials, hard brushes,
metallic or sharp objects. Solvents are
harmful to human health and can attack
plastic parts, while abrasive cleaning
mechanisms and tools may scratch the
surface(s).
• Clean the product's exterior surfaces with
a slightly damp cloth and then dry them
thoroughly.
• Make sure that no water enters the product
interior (for example, through the switch).
• Clean the thermo jug and the filter holder
after use with warm water and a little
dishwashing detergent. Then dry.
• Clean the stand and the lid regularly with a
slightly damp cloth and then dry.
Descaling
• Descale your product regularly depending
on your water's lime content and frequency
of use.
• Use an off-the-shelf decalcifier and follow
the provided instructions.
• Pour fresh water and the specified amount
of decalcifier into the water tank.
• Start brewing and let the water run through
completely. Empty the thermo jug. If
necessary, repeat this process.
• After descaling, rinse the product several
times by brewing water with no coffee to
remove any decalcifier residue.
• Rinse the thermo jug with warm water after
descaling.
KCM207_A5_130705.indb 15
English
15
5/7/13 10:18 AM