Kongskilde KIA 12 Instrucciones De Funcionamiento página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
GB
User instructions
These instructions are for Kongs-
kilde aspirators KIA 12, KIA 20 and
KIA 60.
Application
KIA 12, KIA 20 and KIA 60 aspira-
tors are designed to remove dust
and light impurities from, for ex-
ample, plastic granulate or ground
plastic that is to be re-used.
Installation
The aspirator must be installed
vertically. It can be mounted on a
frame (extra equipment) or be sus-
pended in side fittings.
The blower must be connected to
the aspirator using a clamping band
of the type shown, secured with a
bolt.
16
Safety
Always stop the blower and
distributor impeller before carry-
ing out repairs or maintenance
and make sure they cannot be
started unintentionally.
Never put your hand in the blo-
wer while the motor is running.
Never put your hand in the
aspirator while the distributor
impeller is rotating.
A bottom hopper must always
be mounted on the aspirator so
that it is not possible to touch
the rotating distributor impeller.
Ensure that the aspirator is
installed so that it cannot tilt or
topple over.
If abnormal vibration is ob-
served, the aspirator must be
stopped immediately and the
assistance of qualified person-
nel must be sought.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kia 20Kia 60

Tabla de contenido