Cleaning & Maintenance - Pur Line Warmer Bed Manual De Instrucciones

To switch off the blanket, turn the switch to position 0. The red power indicator will go off, indicating
that the unit is switched off. Now unplug the blanket from the mains outlet.
CLEANING & MAINTENANCE
- Before cleaning the blanket, unplug it from the mains outlet and let it cool down completely or
for at least ten minutes.
- The blanket is equipped with a detachable cable. Disconnect the plug and remove the cable from
the blanket.
- You may wash the blanket gently by hand. The best way to do this is to put the blanket in a bath
with lukewarm water and some mild detergent and then gently squeeze it out.
- Do not use hair dryer to dry this product, have to dry naturally, stretch the blanket out on a flat
surface.
- Rinse the blanket several times to remove all the detergent.
- Store the blanket in a clean and dry place, laid out flat with nothing covering or resting on top
of it.
- Only use the blanket once it is completely dry.
- You may also wash the blanket in a washing machine at a maximum temperature of 30ºC with
low mechanical action and spin. It's advisable to wash it by hand in order to prolong the life of the
product.
WARRANTY
The benefits conferred by this warranty are in addition to all implied warranties, other rights and
remedies in respect of the product which the consumer has under the Trade Practices Act and
similar State and Territory Laws. The original purchaser of this product is provided with the follow
warranty, subject to the following conditions. This product is warranted for a period of 2 years from
faulty, the product will need to be returned to the retailer where it was purchased to be replaced
free of charge or a refund issued. In order to obtain an exchange or a refund, proof of purchase
must be presented to the retailer.
DISCARDING WORN HOUSEHOLD DEVICES
The European directive 2012/19/EC pertaining to electrical and electronic waste prohibits such household
goods from being discarded with local refuse services. Worn devices must be collected separately to optimize
the recovery and recycling rates of the components therein to reduce detrimental effects on the environment
and on human health.
EN
8