Programming Multiple Stages; Changing Optional Programs - Amana MC52200 Serie Manual Del Propietário

Programming Multiple Stages

1. Complete steps 1-9 of "Programming Menu Items".
2. Press STATUS pad to move through stages from
lowest to highest (1 to 4). Display shows "PX" for
one second followed by time and power level for
selected stage. "P" represents program, "X"
represents stage 1,2,3 or 4.
3. Press number pads to enter desired cooking time
and power level.
4. Repeat steps 3-4 for additional stages.
5. Complete steps 9-10 of "Programming Menu
Items".

Changing Optional Programs

1. Open oven door. Display shows "door". If door is
closed or RESET pad is pressed before finishing
programming sequence, oven exits programming
mode.
2. Press pad 1 for five seconds. After five seconds,
signal sounds. Display shows "P" and active menu.
3. Press hidden enable pad. Locate hidden enable
pad to the immediate left and slightly down from
BREAKFAST-1 pad. Display shows "OP:1X". "OP"
represents optional program mode. First number
represents option number and second number
represents functions currently selected for option.
4. Press START pad to advance to other options.
See chart for function options.
5. Press STATUS pad to change option. Press
START to save changes.
6. Repeat steps 4-5 to change additional options.
7. Press hidden enable pad to return to programming
mode. Press RESET pad or close oven door to
exit programming mode.
Option
End of cycle signal tone
Tone when pad is pressed
Control panel resets when
door is opened
End of cycle signal volume Loud*
User time limit
10
Description Code
Off OP:10
Continuous tone* OP:11
5 continous tones OP:12
5 tones, 5 cycles OP:13
Off OP:20
On* OP:21
Off* OP:30
On OP:31
OP:40
Medium OP:41
Off OP:50
On* OP:51