Readout Display; Operating Procedures - Amana MC52200 Serie Manual Del Propietário

Readout Display

"EOC" (End of Cycle)
Lights at end of cooking cycle. Remains lit until door is
opened, or STOP/RESET pad is pressed.
"PAUS" (Pause)
Lights during cooking pause.
"P"
Lights when viewing stage with an enabled pause.
"POWER"
Lights when microwave power is supplied to oven.
"COOK LEVEL"
Lights when viewing stage with reduced power or hold.
Power level digit or H for hold display.
"MENU 1-4"
Lights active menu.
"ITEM"
Lights when number is pressed to select item.
"LMT" (Limit)
Flashes when either user time limit or maximum
quantity limit is exceeded.
"QTY" (Quantity)
Continuously lights during cooking cycle when quantity
greater than one is selected.
"STG" (Stage)
Lights in programming mode when multiple cooking
stages exist for the selected item.
"P "Displays at programming entry point (as soon as
programming mode is entered).

Operating Procedures

Preprogrammed Menu Items
Oven can program up to 99 separate menu items.
Quantities from one to nine for each menu item may be
programmed. Each item may be programmed for up to
4 independent cooking stages. The 99 programmed
items may be distributed or organized into groups by
assigning them to any of the 4 available menus.
1. Open oven door and place food in oven. Display
shows "door". Oven fan operates.
2. Close oven door. Active menu item indicator lights
up. "ITEM" indicator flashes. Press desired menu
pad if different than menu displaying.
3. Press two numbers for menu item to be cooked. For
example, if menu item number 3 is selected, press
0, and 3. "ITEM" indicator lights up. "QTY" and
"LMT" indicators and user defined limit flash in
display. This is maximum quantity of items that can
be programmed to cook in the oven at one time.
4. Press number pad to enter quantity. Quantity
selected, power level for stage 1 and total cooking
time for all stages display. Cooking begins after
quantity is entered.
Note: If quantity selected is not within quantity
limit, signal sounds. Repeat step 4.
5. When cycle is complete, oven stops and signal
sounds. "EOC" displays.
6. Open oven door and remove food.
8