Spare Parts And Accessories - Ega Master 79623 Manual De Instrucciones

Maintenance and assembly instruction
The lubrication of the motor friction bearings has to be done according to the instructions of
the motor manufacturer. Quiet running of the fan must be checked regularly. Unsteady running
is caused by deposition in the impeller or by wear (unbalance) or by damage of the impeller
produced by foreign substances. Take suitable steps (cleaning, changing of defective parts, lining-
up) when the damage or cause for unsteady running is well-known. Unsteady running leads to
vibrations and faults in material.
Disassembly and re-assembly Dismantling and assembly should only be carried out using the
sectional drawing. Disassemble the tool until only, if you are skilled and have the appropriate
technical knowledge. Then only disassemble the tool as necessary to repair as required. Keep
contaminants such as dirt and grit away from the internal parts at all times. Always determine and
correct the cause of the problem prior to re-assembly. Further wear and tool failure can result, if the
original cause is not corrected.
Only original spare parts may be used. There is no warranty for damages and liability is
disclaimed, if non-original spare parts and accessories are used. The repairing of the machine is
allowed authorized expert companies only. The accessories applicable with our machine are listed
in our brochure.
Problem
a
Motor doesn' t start
b
Other problems
REPAIR INSTRUCTION

SPARE PARTS AND ACCESSORIES

Cause
No connection to power
supply
Remedy
Connect to power supply
Contact authorized expert
company
13