Installation
STEP 5 Position the drain hose
The drain hose can be positioned in three ways:
B
*
*
English
24
WF45K6500AV_DC68-03665A-02_EN.indd 24
A
A
C
D
E
A
Over the edge of a wash basin
The drain hose must be placed at a height
of between 24 in. (60 cm) and 35 in.
(90 cm) from the floor. To keep the spout
of the drain hose bent, use the supplied
plastic hose guide (A). Secure the guide
to the wall using a hook to ensure stable
drainage.
ln a standpipe or laundry tub
The laundry tub (B) or standpipe (C) must
be no shorter than 18 in. (46 cm) and no
higher or longer than 96 inches (245 cm).
Make sure the drain hose and the
standpipe are not airtight.
NOTE
D: Hose retainer / E: Tie straps
CAUTION
• Connect the hose guide (A) within 6 in.
(15 cm)* of the end of the drain hose.
If the drain hose is extended beyond
the end of the hose guide, mold or
microorganisms could spread inside the
washer.
• The drain hose can be installed up to
96 in. (245 cm) high, but the draining
capability can be reduced at the
maximum height. Water remaining in
the drain system may cause an odour.
• If the drain hose is installed less than
18 in. (46 cm) high, water can be
drained during the process due to a
siphon phenomenon. If this happens, a
'4C' information code appears on the
display.
2016/8/12 14:37:47