Handling And Installation; Instructions And Warnings For Handling And Installation; Packaging And Unpacking; Handling And Lifting - Angelo Po 0G0FA0 Manual De Uso

INSTRUCTIONS AND WARNINGS FOR HANDLING AND INSTALLATION

Important
All handling and installation operations
should be carried out in accordance with
current legislation on health and safety at
work.

PACKAGING AND UNPACKING

The packaging is designed to reduce space and as
appropriate to the type of transport used.
To simplify transport, some components may be re-
moved and suitably protected and packed for trans-
port.
The packaging carries all information necessary for
loading and unloading.
When unpacking, check that all components are
present in the correct quantities and are undam-
aged.
The packaging material must be properly dis-
posed of in accordance with legal requirements.
TRANSPORT
Different means of transport may be used, depend-
ing partly on the destination.
IT
The chart shows the most commonly used alterna-
tives.
During transport, fix the packaging to the means of
GB
transport securely to prevent undesirable shifting.
DE
FR

HANDLING AND LIFTING

ES
The appliance can be handled using fork-lift or hook
equipment of suitable load-carrying capacity. Be-
fore lifting, check the position of the load's centre of
gravity.
Important
When engaging with the lifting equipment,
watch out for the gas supply pipe.
English

HANDLING AND INSTALLATION

If necessary, the person authorised to carry
out these operations must organise a "safe-
ty plan" to protect the people directly in-
volved.
- 12 -
IDM-39603309200.tif
Lifting devices
Means of transport
IDM-3960200180.tif
IDM-39603611900.tif
7