Basic Operation - Premier ED-5192 Manual De Instrucciones

3.2 BASIC OPERATION

3.2.1 CERO THE SCALE
When there is nothing on the scale but reading is not zero, press the cero key to turn on the zero
indicator.
3.2.2 weighing
Ensure that scale is in zero position and zero indicator is plowing, place an item for weighing on the pan,
the weight of the item will be showed on the weight window.
3.2.3 tara
Put container on the platter, once the weight reading is stable, press the tara key, the tara indicator will
be on and the container's weight will be deducted. When it is time to clear the tare, take off the
container, and press tara key again.
3.2.4 overload warning
Please do not add item that is over the maximum capacity, when the scale is ringing an alarm, remove
the item on the platter to avoid damage to the load cell.
3.2.5 unit price setting
To trade with the asc scale, it is necessary to setting a unit price of the goods, then use this unit price to
determine how much valye of the goods which placed on the platter.
When scale displaying the weight of the goods placed on the scale, set the unit price through numeric
keys, set unit price is showed in unit price window display, total price window display shows the total
price of the goods. To cancel the previous unit price, press C key.
3.3ACCUMULATOR OPERATION
3.3.1 Prepare to accumulate
Each time before accumulate, please make sure the platter is empty, the current accumulator values is
reset to zero, and the weight reading is stable.
3.3.2 Accumulation operation
Put the weight item on platter, wait for the weight reading to be stable, press the add key, the window
will show add n-being the number of how many times you press add.
If you have entered the unit price for that item, the accumulate operation will show the total of both-
weight as well as price as following:
Place an item on platter, allow the scale reading to be stable, enter unit price using numeric keys, unit
price window will show the unit price and total price window will show total price.
Now, press add key, it will store the value of weight and price both.
Now, remove the first item from the platter, place another item on the scale, allow it to be stable, enter
unit price using numeric keys, after observing unit price and total price, press add key again. The unit
price window will flash add 2, and the weight window are as well as total price window will show
accumulated weight and accumulated price respectively.
You can carry on this way for 99 times with the ACS scale.
3.3.3 accumulate clear
You can clear the accumulated value by press C (clear)key at any time.
3.4 UNIT PRICE STORAGE
Acs scale can store 8 sets unit price.
3.4.1 store the unit price
Press store key, then enter desired unit price using numeric keys.
Now press M*(*=1 to 8) key. The value will be stored into respective M*(*=1 to 8) key. If you have
already entered any value in that key, it will be replaced by new value.
P-3