Premier ED-5192 Manual De Instrucciones página 11

3.4.2 load the unit price
If you want to use the unit price stored in the acs, while weighing, that press respective M*(*=1 to 8) key
after the weighing display is stable, the unit price will be loaded and it will be displayed in unit price
window.
SECTION 4 CAUTION
4.1 BATTERY
The battery must be recharged properly after use of the scale without mains power.
Normally; charge for 1,2 hours for each using 1 hour.
If it is not used for longer time, then charge it continuously at least for 24 hours. Otherwise it will cause
damage to battery.
Before you begin to charge battery, please turn off the scale firstly.
4.2 water/temperature
Protect your scale from heavy raining, water flooding and also from direct sunlight and high
temperatures (above 50degree.) this scale is not a water proof scale.
4.3 humidity
Protect it from the constant humidity, don't install near humidifier.
4.4 magnetic field
don't install your scale near strong magnetic field it may damage delicate parts of your scale.
4.5 repair/maintenance
don't try to open the scale by yourself or by unauthorized technical person. This may damage the scale
permanently. Always contact your nearest dealer/service station for emergency repairs.
SECTION 5 COMMON TROUBLE SHOOTING
Following chart will show you the common trouble shooting
Trouble
Ac lamp is not
glowing
Scale is not turning
on with battery
Over voltage led
glows, alarm and
automatically turn off
Weight reading is
unstable
Our products operates on approved quality management system and is certified to ISO9001:2000,
P-4
Instruction
Power may not be 1) the mains plus may
connected be disconnected
2) the power cable is
damaged
There is no dc 1) the storage battery is
power supply to the
scale 2) the battery
Over voltage Battery is in use for too
long time
Over voltage or Insufficient voltage or
effected by use of battery is
moisture prolonged even after the
warning alarm or too
much humidity in
surrounding
Possible reason
damaged
connection are not
proper
Remedy
1) insert the power plug or
replace it if damaged.
2) Change the power cable
1) replace the battery of the
similar model
2) ensure that connections
are in good condition
1) charge the battery
2) change the battery is
found damaged
Charge the battery for at
least 10 hours, or clean the
mother pcb for driving