Totalizing - Denver MAXX Serie Manual De Instrucciones

Totalizing

Purpose
With this application program you can add up successive weight values
exceeding the capacity of the balance/scale.
Example:Totalizing weight values
Step
1. Select application program
2. Select Totalizing
3. Confirm setting
Symbol " " on the display:
application is active
4. If necessary: zero the balance/scale
5. Place sample on balance/scale
(in this example, 380 g)
6. Store value in memory.
Total weight is displayed
∑
steadily; symbol flashes.
7. Remove sample from balance/scale
8. Place the next sample
on the balance/scale
(in this example, 575 g)
9. Store value in memory. Totalized stored
weight is displayed; symbol
∑
Note: symbol remains on indicating
stored value in memory until cleared
10. To view the current weight for 2 seconds (F)
(if a printer is connected, a printout
is generated)
11. Clear totalizing memory
(if a printer is connected, total is printed)
12. End Totalizing
13. Reactivate Totalizing (if no other
application program has been selected)
(if a printer is connected, total is printed).
14. Repeat procedure starting from Step 6.
Key (or instruction)
(ZERO) ≥ 2 sec
(F) repeatedly
(ENTER)
(ZERO)
(ENTER)
(ENTER)
∑
flashes.
(F) ≥ 2 sec
(ENTER) ≥ 2 sec
(F)
Display
13