GBR USER MANUAL
IMPORTANT SAFEGUARDS
This User Manual contains information on the use and care of this product. Please read this user manual carefully before using the appliance and save it for future reference.
•
Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
•
For indoor use only.
•
Never attempt to dissemble and/or repair the item by yourself. If you encounter problems, please contact the nearest customer service centre.
•
This appliance is not intended to be used by persons (including children) with reduced physical, sensory or mental capabilities. Neither for persons with a lack of experience and/or
knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
•
Store the scale in a dry place and make sure there are no objects on the scales
•
Do not lubricate the internal mechanisms of the scales
•
Do not overload the scales
•
Carefully put products on the scales, do not hit the surface
•
Protect the scales against direct sunlight, high temperatures, humidity and dust
BEFORE FIRST USE
•
Please unpack your appliance. Remove all packaging materials
•
Wipe the surface with a damp cloth and detergent
USING THE DEVICE
PREPARING FOR USE
•
Open the battery compartment lid and install one battery type CR2032, observing polarity. Close the lid.
•
Place the scale on a flat, stable surface
WEIGHING
•
Turn on the scale by pressing the «On /Off/Tare» button
•
Wait a few seconds until the display shows "0.00"
•
Place the product on the scale, the display will show its weight.
•
On the back side of the scale, there is a unit of measure switch. Use it to set the units of measure: grams (g), kilograms (kg), pounds (lb), ounces (oz) or milliliters (ml).
•
To measure the tare weight, place the container on the scale, press the «On/Off/Tare» button without removing the container from the scale, place product into the container. The display
will only indicate the weight of the products.
•
To maximize the battery life, always press the «On/Off/Tare» button to switch off the scale after use.
AUTO SWITCH-OFF
•
This scale automatically switches off after 2 minutes downtime.
3
LU-1340