Control And Display; Remote Control - BH FITNESS BI200 Instrucciones De Montaje Y Utilización

Drivers adjust the handle bar to a suitable height to make it safe and comfortable
for driving.
Step four: Install the decorating cover and stick the mark sticker.
Push down the decorating cover to the steering stick as the display below.
Stick the mark sticker at the proper place.
Step five: Inspect whether all the parts connected rightly, fastened or not. Ready to start
up.
III. Control and display

1. Remote control

The maximum remote control distance is 2 meters.
Button A is for start and shutdown. Press button A, the vehicle starts, does self-checking.
When the balance light lightens, the vehicle is completely started.
Button B is for switch between Primary and Normal mode. When the primary light lightens,
it is in primary mode, which means low speed (max speed is 8km/hour). When the primary
light is off, it is in normal mode, which means high speed.
Please keep well the remote control, don't damage or lose it. The vehicle body
depends on the remote control to start. The remote control will not work when the
vehicle is under driving. If it is lost, please contact the factory to supply a new one.
18
BI200-BI220