Shower Radio
Control & Compartment:
1. Volume Control
2. Tuning Control
3. Speaker
4. Band Switch
5. Hanger
6. Suction Cups or Nylon Rope
7. Stand
8. Battery Cover
Radio Operation:
1. Turn radio on by rotating the Volume Control (1) on
the ON/OFF Control
2. Select the required radio band with the Band
Switch (4)
3. Tune in the desired station by turning the Tuning
Control (2)
4. Adjust the Volume Control (1) to the desired sound
level
How to Install the Radio
1. Use Suction Cups (6) to mount to any smooth surface such as bath tiles. The Suction Cups (6)
may need to be moistened slightly
2. Place the Mounting Bracket in the desired location (5)
3. Nylon Rope can be threaded through the Hole (6) and can be tied on the shower head or rail
4. Use Stand (7) on a flat surface for support
Battery Power Operation
1. Open Battery Cover (8) of radio by turning in direction as indicated
2. Insert 3 x "AA" size batteries according to the polarity indication (batteries not included)
3. Close the Battery Cover (8)
Warning: Never submerge the unit under water. Doing so will result in irreversible damage to
the electronics.
Safety precautions:
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
ENGLISH
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is
required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the
product to water or moisture.
2