Beper 70410 Manual De Instrucciones página 11

Humidifiers with aroma oil box Use instructions
PRODUCT DESCRIPTION Fig. 1
1 Tank cover
2 Mist outlet
3 Base
4 Water tank
5 Essential oils tank, with lid
6 Switch RESET
7 Power-on light
8 Tip-over switch
9 On/off knob
10 Inhibitor
11 Water tank cap with water outlet
12 Water basin
13 Steam generator
14 Mains cord
INSTRUCTIONS FOR USE
FILLING THE WATER TANK AND ADDITION OF ESSENTIAL OILS
Remove the water tank from the unit and turn it over. Remove the tank cap by turning
counterclockwise.
Fill the tank with tap water only, BUT TEMPERATURES BETWEEN 10 AND 50 ° C; NOT
PAID DIRECTLY FROM THE TAP WATER! Fig. 2
Only put water in the water tank. Never put any additives, e.g. inhalants or essential
oils, in the water tank.
Put the tank cap back on the water tank and turn the tank cap clockwise until it is tightly
locked.
Put the water tank back onto the base and carefully align it in its original position on the
base.
ESSENTIAL OILS MAY BE ADDED BUT ONLY THROUGH THE APPROPRIATE TANK:
Remove the oils tank from the water tank with help of the two side wings, remove the lid
and put a few drops of oils. Then close the lid and put the tank back into position. Fig. 3
Put the mains plug in the wall socket.
Do not use an extension cord.
Turn the on/off knob clockwise until you hear a click to switch on the humidifier.
The power-on light goes on.
Turn the on/off knob anticlockwise until you hear a click to switch off the humidifier.
The power-on light goes out.
Remove the mains plug from the wall socket.
11