Limpieza Y Mantenimiento; Main Components - SOLAC TV8425 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3
TV8425.book Page 4 Thursday, March 26, 2009 3:23 PM
i
Un dispositivo de seguridad interrumpe el funcionamiento del termoventilador en caso de sobrecalentamiento
accidental (ej. obstrucción de las rejas de entrada y salida del aire, motor que no gire o gira despacio). Una
vez haya desaparecido este sobrecalentamiento el aparato volverá a funcionar.
4

LIMPIEZA Y MANTENIMIENTO

Antes de la limpieza, asegúrese que el aparato está apagado y desconectado de la red.
1
Deje que se enfríe.
2
Puede usarse un aspirador para limpiar el polvo y las pelusas de la rejilla frontal y posterior.
3
Después de cada estación, le aconsejamos limpie el aparato con un paño y guárdelo en su caja en
un lugar seco.
4
Antes de cada utilización, asegúrese que el aparato se encuentra en perfectas condiciones.
. ENGLISH
1
IMPORTANT
Read these instructions carefully before using your appliance, and keep them for future reference.
Remove all elements from the inside or outside of the appliance used for protection during transport or for sales
promotions, such as paper or plastic bags, plastic sheets, cardboard and stickers.
This fan heater is an excellent source of additional heat: It should not be considered as a principal heating system.
Before connecting the appliance, make sure that the voltage shown on the specifications plate is the same as
the mains power supply at your home.
Do not obstruct the air inlets or place any objects on top of the vents or openings of the appliance, since this
could cause an electrical shock. Do not insert anything into the grill.
Always place the fan heater on a solid, flat and horizontal surface. Do not place it on excessively soft surfaces
such as a bed. Do not use on wet surfaces or outdoors.
Leave enough space around the fan heater (at least 50 cm above and to the sides, and 120 cm in front).
Position the fan heater away from flammable materials (glues, curtains, carpet...).
Do not place the fan heater directly underneath a power outlet.
Do not use your fan heater if you see that the power cord is damaged or notice any defect on the appliance.
For safety reasons, take it only to an authorised Technical Service Centre.
Always make sure you turn off the power switch (2) and unplug the appliance from the mains when not in use.
Do not touch the grill, since it can become very hot.
• c
NEVER COVER the appliance, in order to prevent it from overheating.
Do not place the cable under carpets or under any other kind of material.
Do not place the appliance on top of the power cord when the appliance is hot. Do not operate the appliance with
the cable wound up.
Do not handle the appliance with wet hands.
Do not use the appliance near a bath, shower or swimming pool or any other water container. If the fan heater falls
into water, DO NOT try to take it out. Unplug it from the mains.
Do not use the fan heater to dry clothes, do not leave furniture closer than 50 cm in front of the appliance, and
do not use it in rooms with less than 4m
Keep the appliance out of the reach of children.
This appliance must not be used by disabled persons and children, or those who are not experienced in the
use of the appliance, except when they are guided or supervised by someone who knows the safety instructions
that must be followed to operate the appliance.
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
• q
IMPORTANT!! When you want to dispose of the appliance, NEVER throw it in the rubbish
bin. Take it to your nearest CLEAN POINT or the waste collection centre closest to your
home for processing. You will thus be helping to take care of the environment.
2

MAIN COMPONENTS

1
Temperature control
2
Function selector:
0
Off
v
Ventilation
1
Heating 1000 W
2
Heating 2000 W
3
OPERATION
1
Plug your fan heater into the mains.
2
Use the function selector (2) to select the desired function and turn the temperature control (1) to the right.
4
2
of floor space.
3
"On" indicator light
4
Front air outlet grille.
5
Carry handle
6
Compartment for the cord
MOD. TV8425

Publicidad

Tabla de contenido
loading

Tabla de contenido