Tabla de contenido
Publicidad
Boom Box Speaker
1. Off/On switch
2. Bass control
3. Treble control
4. Volume control
5. Battery compartment (rear)
6. Input jack (rear)
•
Insert three 1.5 V AA batteries into the compartment by pulling down the tab of the battery
compartment at the top and opening the door. Observe the polarity markings on the base of the
compartment.
•
Place the amplifier in a suitable position and switch the on/off switch to the up (on) position, the
LED will illuminate.
•
Turn the volume control to minimum then insert a 3.5mm jack lead into the socket on the rear of the
amplifier. Connect the other end into the line or headphone out of the MP3 player.
•
Adjust the volume control on the amplifier to the desired position.
•
Adjust the bass and treble controls to obtain the desired sound quality.
NOTE: If using the headphone socket on the other unit, the volume level of this unit needs lowering in
order not to overload the input of the unit.
SAFETY:
•
Never mix old and new batteries
•
Never mix different types of batteries
•
Remove flat batteries from equipment
Power Supply: DC 4.5 V
Safety precautions:
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
ENGLISH
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is
required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the
product to water or moisture.
2
Publicidad
Tabla de contenido
