Troubleshooting Guide - Twin-Star International DFS-450 Manual De Instrucciones

TROUBLE SHOOTING GUIDE
PROBLEM
1. No power. All switches are in the
ON position and the unit does not work.
2. The emberbed is glowing, but the
flame is not functioning properly.
3. The flame effect is functioning, but
the heater does not blow out warm air.
4. Heater does not work, while HEAT
switch is in the
" "
" "
2a. Open the back panel of the unit. Check whether
2b. Check whether Flame Generator drive motor
ON position.
1. Check that the unit is plugged into a standard
120V power outlet.
the spinner spindle was connected to the motor.
is running. If not, call the customer service.
3. Check that Mechanical Thermostat Knob whether
is set to the highest setting (clockwise).
4. Turn all switches to the OFF position and unplug
the unit from the wall outlet for 5 minutes. After
5 minutes, plug the unit back into wall outlet and
operate as normal.
E-7
SOLUTION