■ Repeat the above steps to install the
side handles. (Fig. 3)
To Install Wind Guards
■ Open the stove
lid, rotate the
wind guard
holder inside the
stove lid toward
outside. (Fig. 4)
■ Insert the wind
guard holder
into the slot on
the wind guard.
(Fig. 5) Repeat
on the other
side.
■ The wind guards can be opened and
used as side tables. (Fig. 6)
NOTE: Do not put heavy objects on the
wind guards in case of destroying it when
using as side tables.
■ Install the grate as shown. (Fig. 7)
■ Open oven door and insert the oven
heat diffuser in the lowest support
position. Make sure it is inserted
completely. (Fig. 8)
NOTE: The oven heat diffuser is
recommended to help distribute heat
evenly and keep the burner clean.
Fig. 3
■ Insert the oven rack. (Fig. 9)
NOTE: The height of the oven rack
may be adjusted to accommodate the
size of the food dish. You may insert
the oven rack at different heights.
Fig. 4
Also, the oven rack may be flipped
for additional height adjustments. To
accommodate a large food dish, the
Slot
crumb tray may be removed and the
oven rack placed in the lowest
support position.
Fig. 5
■ Push in and turn right to close the
control knob. Make sure all 3 control
knobs are in closed position. (Fig. 10,
11, 12)
Fig. 6
Fig. 7
• Keep all connections and fittings
clean. Inspect propane cylinder and
propane connections for damage
before attaching.
• During set up, check all connections
and fittings for leaks using soapy
water. Bubbles indicate a leak. Never
use a flame.
English - 4
Fig. 10
Fig. 12
CAUTION
SERVICE SAFETY
Fig. 8
Fig. 9
Fig. 11