Publicidad
Idiomas disponibles
Idiomas disponibles
Three power supply possibilities
1. Via the 5 V antenna voltage of the DVB-T receiver
2. Via power inserter with power supply
3. Via USB connection from the PC/notebook
1. Voltage supply via 5 V antenna voltage of the DVB-T receiver
When connecting this way, make sure that your DVB-T equipment supplies the
required 5 V antenna voltage and is turned on. Please refer to the instructions
manual of your DVB-T device.
• Connect the external DVB-T antenna to the antenna input of your
DVB-T equipment.
• Plug in the coaxial plug to the antenna input of your DVB-T
equipment.
2. Voltage supply via supplied power supply
Use the power unit and the power adapter when more than one DVB-T device
is using the antenna. When using this connection method, make sure that the
antenna voltage is turned off in all the connected DVB-T devices. Please refer to
the instruction manuals of your DVB-T devices.
• Connect the antenna input of your DVB-T device to the „Receiver"
port of the power adapter. Use the short coaxial cable (Coaxial plug
to coaxial socket).
• Plug in the coaxial plug of the supplied aerial lead (Coaxial plug to
F plug) to the power adapter („Antenna" input).
• Plug in the low-voltage plug of the supplied power unit to the
lowvoltage socket on the side of the power adapter.
• Plug the power unit into a wall outlet of the public power supply grid.
3. Power supply via the USB interface
• With this type of connection, make sure that the USB interface of your
PC enables power supply and is capable of supplying the necessary current
(40mA).
• Connect the antenna cable of the miniature DVB-T antenna with the antenna
input of your DVB-T tuner.
• Connect the USB adapter cable to a USB interface on your PC and turn
the PC on.
wentronic Electronic Components Handels GmbH hereby declares that Article
No. 67171/ 67172 complies with the basic requirements and other relevant regu-
lations of directives 2004/108/EC.
5
Publicidad
