Driver Installation - BlueStork BS-EHD-25/SU/F Manual Del Usuario

ENGLISH
Use method:
a. Connect the well-installed HDD external case to USB
–A (3) connector of Y cable, and plug the USB-A (2)
connector into USB port of computer.
b. When the computer cannot supply enough power
for this device, you can plug USB-A (1) connector for
more power to run your device normally.
Attention: USB-A (1) connector can supply power
only; please do not use it for data accessing.
VI . DRIVER INSTALLATION
a. Setup mode
VISTA/7/8, the system can detect and setup [USB Mass
Storage Device] directly.
Then an icon
of the system toolbar as below:
under Windows2000/2003/XP/
will appear on the bottom right area
7