Description And Use; Safety - Baxi SILA RCV 300 Instrucciones De Instalación, Funcionamiento Y Mantenimiento

ENGLISH

Description and use

Sila RCV 300 (hereinafter device ) is a heat recovery unit for residential use characterised by its high thermal exchange
efficiency, low consumption (from 14.8 W-Th-C to 32.0 W-Th-C) and small size.
The device is controlled by an advanced electronic management system and is equipped with fan motors with EC brushless
motors.
A heat exchanger is set inside the device. The exchanger guarantees thermal exchange efficiency ≃ 92.5 %. The device is
equipped with an automatic bypass function and incorporated antifreeze protection. (See "Use" for a more detailed
description of the various functions).
These devices have been designed for residential and commercial use.

Safety

Warning:
!
this symbol indicates that care must
be taken to avoid injury to the user
• Do not use the device for any function other than that specified in this booklet.
• After removing the product from its packaging, ensure that it is not damaged. If in doubt please contact
a professionally qualified person or authorised Technical Assistance Centre.
• Never leave packaging parts within reach of children or disabled persons.
• The use of any electric device requires compliance with a few fundamental rules, including: never touch it with wet or
humid hands, never touch it when barefoot.
• Do not use the unit in the presence of flammable substances or vapours such as alcohol, insecticides, gasoline, etc.
• Take precautions to prevent gas coming into the flue pipe or from other open flame devices from entering into the room.
• In order to avoid any danger of accidental reset of the thermal breaker device, devices must not be powered by an exter-
nal switch device such as a timer, or must not be connected to a circuit that is regularly powered or disconnected.
This appliance can be used by children aged from 8 years and above and persons with reduced
•
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
• The appliance must be installed by a professionally qualified electrician.
• An omnipolar switch with a contact opening distance of 3 mm or higher should be provided for in-
stallation, enabling complete disconnection under overvoltage category III conditions. Products
equipped with three-phase wiring (T) engines ALWAYS require connection to 380-415V (or only
400V where required) threephase lines, or also 220-240V (or only 230V where required). Any kind
of modification shall be considered as product tampering and shall nullify the relative warranty. Pro-
ducts equipped with single-phase wiring (M) engines ALWAYS require connection to 220-240V (or
only 230V where required) single-phase lines. Any kind of modification shall be considered as pro-
duct tampering and shall nullify the relative warranty.
Caution:
!
this symbol indicates that care must
be taken to avoid damaging the appliance
• Do not make changes of any kind to the unit.
• Maintenance instructions must be followed to prevent damage to and/or excessive wear of the device.
• Do not leave the device exposed to adverse weather conditions (rain, sun, etc.)
• Do not rest objects on the device.
• Internal cleaning of the product must only be carried out by qualified personnel.
• Periodically check device conditions. If imperfections are noted, do not use the unit and immediately contact an authorised
Baxi Technical Assistance Centre.
• Promptly contact an authorised Baxi Technical Assistance Centre in the event of unit malfunction and/or failure and
request the use of original Baxi spare parts for any repairs.
• In case of damage to the power cable, have a Baxi Assistance Centre replace it immediately.
• If the product falls or receives a strong blow, immediately have it inspected at an authorised Baxi Technical Assistance
Centre.
• The device must be installed so as to ensure that no one can come near its moving or live parts during normal operating
conditions.
19